• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.xmyzcy.com
新闻中心当前位置:博亿彩票APP下载-新闻中心
    弧形玻璃门安装注意事项
    来源:http://www.xmyzcy.com   时间:2016-7-20 13:10:15
    玻璃门通透的外观为大多数小户型偏爱,但是玻璃的特制直接导致玻璃门必须有独特的保养手段。那么弧形玻璃门安装需要注意什么?
    Glass door transparent appearance for the majority of small Huxing preference, but a special glass directly led to the glass door must have the most unique means of maintenance. So what should be noticed in the installation of curved glass doors?
    卫生间弧形玻璃门一般都是根据卫生间户型要求而设计的。淋浴房的弧形玻璃门的设计是以扇形底座为。弧形玻璃门的设计一方面可以在不影响其他洗刷功能的情况下,有效的利用卫生间的剩余空间,另一方面,可以通过设计扇形玻璃门来化解卫生间的不利装修风水。
    Bathroom arc glass doors are generally designed according to the requirements of the toilet. The curved glass door of the shower room is designed with a fan base. Design of curved glass door can be in does not affect the other function for washing, effective use of bathroom space left, on the other hand can through design sector glass door to defuse the bathroom bad feng shui decoration.
    1、圆弧自动门固定框架的安装:
    1, the installation of the fixed frame of the circular arc automatic door:
    (1)六根立柱按尺寸要求安装。
    (1) six columns according to the size of the requirements of the installation.
    (2)立柱和帽头组成,用螺钉将帽头固定在立柱上。
    (2) column and cap, the cap is fixed on the upright post by screws.
    (3)下码头与立柱组装,用角铝和螺钉连接下码头和立柱。
    (3) under the pier and the column assembly, with the angle of aluminum and screws to connect the pier and the column.
    (4)上支撑组件进行安装,梁与梁靠角支连接,用螺栓螺母固定。梁与帽头内壁连接,用角支和螺钉固定。
    (4) the support assembly is installed, and the beam is connected with the beam by the angle support, and fixed by the bolt and nut. The beam is connected with the inner wall of the cap, with fixed angle support and screw.
    2、扁钢的安装:扁钢装在帽头内表面,扁钢上固定驱动机构的各部件。
    2, installation: flat surface mounted flat in the inner part of the crown, flat fixed on each component of the driving mechanism.
    3、导轨支架安装(弧形轨支托的安装):用M8X25螺钉将驱动装置固定板安装到扁钢上,对于1/2圆的驱动机构需装12个导轨支架。
    3, guide rail bracket installation (arc-shaped branch rail supporting installation): screw M8X25 will drive device fixed plate mounted to the flat steel, for 1 / 2 round driving mechanism needs to install 12 guide rail bracket.
    4、安装圆弧形导轨:用M6X20螺钉将圆弧形导轨固定到导轨支架上。

    4, the installation of arc guide rail: M6X20 screws with the arc guide rail is fixed to the bracket.

    本文由济南玻璃门公司发布,浏览网址http://www.xmyzcy.com

伯爵彩票APP 宝马彩票APP下载 宝马彩票APP下载 伯乐彩票注册 河北快3走势图 泊利彩票APP下载 爱乐彩票平台 伯爵彩票APP 伯爵彩票APP下载 爱拼彩票平台