• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.xmyzcy.com
新闻中心当前位置:博亿彩票APP下载-新闻中心
    玻璃门安装的具体方法
    来源:http://www.xmyzcy.com   时间:2017-10-13 17:19:53
    1:定位、放线:由固定玻璃和活动玻璃门扇组合在的玻璃门,统一进行放线定位。
    1: positioning and laying out: fixed glass and movable glass door are combined in the glass door, unified positioning.

    2:安装框顶部限位槽:限位槽的宽应大于玻璃厚度2-4mm,槽深为10-20mm。安装时,先由所弹中凡线引出两条金属装饰板边线,然后按边线进行门框顶部限位槽的安装。

    济南玻璃门

    2: mounting frame top slot: the width of the slot should be greater than the glass thickness of 2-4mm, the groove depth is 10-20mm. When installing, two lines of metal decorative boards are drawn out from the center line of the shell, and then the installation of the limit slot on the top of the doorframe is carried out by the side line.
    3:安装金属饰面的木底托:先把方木固定在地面上,然后再用万能胶将金属饰面板粘在木上,方木可采用直接钉在预埋木砖上,或通过膨胀螺栓连接的方法固定。
    3: the installation of metal decorative wood base: first, the wood is fixed on the ground, then the adhesive to metal panels bonded to the wood, the wood can be used directly in the nail embedded block, or through an expansion bolt connection method of fixed.
    4:安装竖向门框:接所弹中心线钉立门框方木,然后用胶合板确定门框柱的外形和位置,后外包金属装饰面。
    4: installation of vertical frames: the elastic line nail vertical door frame timbers, and then determine the shape and position of frame column with plywood, finally outsourcing metal decorative surface.
    5:安装玻璃:用玻璃吸盘机把厚玻璃吸紧,然后手握吸盘把由2-3人将厚玻璃板抬起,移至安装位置。
    5: install glass: use glass suction machine to absorb thick glass, and then hold the suction cup, the 2-3 people will lift the thick glass plate, moved to the installation position.
    6:固定玻璃:在底托方木上的内外钉两根小方木条把厚玻璃夹在中门,方木条距玻璃板面4mm左右,然后在方木条上涂刷万能胶,将饰面金属粘卡在方木条上。
    6: fixed on the bottom support and square glass: the nail two small wood thick glass folder in the door, a square bar from the surface of the glass plate around 4mm, and then in a square bar coated adhesive, the decorative metal sticking on square bar.
    7:注玻璃胶封口:在顶部限位槽和底部托槽口的两侧,以及厚玻璃与框柱的对缝处等各缝隙处,注入玻璃胶封口。
    Note 7: glass glue sealing: at the top limit on both sides of a groove and the bottom bracket of the mouth, and thick glass and frame column on the various gaps, injection plastic glass sealing.
    8:玻璃之间对接:玻璃门固定部分因尺寸过大而需要拼接玻璃时,其对缝要有2-3mm的宽度,玻璃板边要进行倒角处理。
    8: Glass: glass door fixing part for docking oversized and mosaic glass, the seam to have a width of 2-3mm, the edge of the glass sheet to chamfer.
    如有需要,欢迎新老客户前来选购!我们本着质优价廉的宗旨来为您提供产品和服务。真诚期待与您合作。
    If necessary, welcome new and old customers to come to buy! We aim at providing you with products and services with high quality and low price. Sincerely look forward to working with you.
必中彩票注册 必中彩票注册 泊利彩票APP下载 泊利彩票平台 河北快3开奖结果 必博彩票APP下载 爱拼彩票平台 爱购彩票APP 伯爵彩票APP 博悦彩票APP下载