• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.xmyzcy.com
新闻中心当前位置:博亿彩票APP下载-新闻中心
    玻璃门安装方法步骤
    来源:http://www.xmyzcy.com   时间:2018-3-6 14:55:21
    在日常生活中,玻璃门已经被广泛的安装应用了。由于不同类型的玻璃门总会展示出其自身不同的美,给人带来不一样的视觉体验,因而,玻璃门深受广大群众的欢迎。那么玻璃门怎么安装?以下就是玻璃门安装的方法步骤:
    Glass doors have been widely installed in daily life. Because different types of glass doors always show their own different beauty and bring different visual experience to people, glass doors are welcomed by the masses. So how do the glass doors be installed? The following are the steps of the glass door installation:
    1、放线定位:由固定玻璃和活动玻璃门扇组合在的玻璃门,统一进行放线定位。
    1, line positioning: the glass door which is composed of fixed glass and active glass door fan.

    2、安装框顶部限位槽:限位槽的宽应大于玻璃厚度2-4mm,槽深为10-20mm。安装时,先由所弹中凡线引出两条金属装饰板边线,然后按边线进行门框顶部限位槽的安装。

    济南玻璃门

    2. The limit slot at the top of the mounting frame: the width of the limit slot should be larger than the glass thickness 2-4mm, and the depth of the slot is 10-20mm. When installing, two metal decorative plate border lines are drawn up first, and then the top limit slot of the door frame is installed according to the border line.
    3、安装金属饰面的木底托:先把方木固定在地面上,然后再用万能胶将金属饰面板粘在木上,方木可采用直接钉在预埋木砖上,或通过膨胀螺栓连接的方法固定。
    3, the installation of metal decorative wood base: first, the wood is fixed on the ground, then the adhesive to metal panels bonded to the wood, the wood can be used directly in the nail embedded block, or through an expansion bolt connection method of fixed.
    4、安装竖向门框:接所弹中心线钉立门框方木,然后用胶合板确定门框柱的外形和位置,后外包金属装饰面。
    4, the installation of vertical frames: the elastic line nail vertical door frame timbers, and then determine the shape and position of frame column with plywood, finally outsourcing metal decorative surface.
    5、安装玻璃:用玻璃吸盘机把厚玻璃吸紧,然后手握吸盘把由2-3人将厚玻璃板抬起,移至安装位置。
    5, install glass: use a glass sucker to tighten the thick glass, and then hold the sucker to lift the thick glass plate by 2-3 people and move it to the installation position.
    6、固定玻璃:在底托方木上的内外钉两根小方木条把厚玻璃夹在中门,方木条距玻璃板面4mm左右,然后在方木条上涂刷万能胶,将饰面金属粘卡在方木条上。
    6, fixed on the bottom support glass: inside and outside the wooden nails on the two small wood put thick glass folder in the door, a square bar from the surface of the glass plate around 4mm, and then in a square bar coated adhesive, the decorative metal sticking on square bar.
    客户的满意就是对我们的肯定,欢迎您前来选购我公司的产品,我们一直以为您提供产品为己任并一直坚持这样做。欢迎您的光临。
    Customer satisfaction is our affirmation. You are welcome to purchase our company's products. We have always thought that you are responsible for products and have always insisted on doing so. Welcome to your visit.
河北快3走势图 博美彩票APP下载 宝马彩票APP下载 宝赢彩票平台 河北快3走势图 博美彩票APP下载 河北快3走势图 爱尚彩票平台 宝赢彩票APP下载 爱尚彩票平台